5
operation
IMPORTANT: Maximum water temperature 40°C.
Fill the remaining space in the clean water tank with
warm tap water. Replace the measuring cap (Fig 4/5).
NOTE: use only Vax carpet cleaning solution, using
other cleaning solutions may cause excessive foaming.
This may cause the float to shut of the cleaner
prematurely. Using other cleaning solutions will
invalidate your guarantee.
Place the bottom of the clean water tank into the cleaner
and push into place. There will be an audible click when
the clear water tank is in the correct position (Fig 4/6).
Plug the cord into a electrical socket. Turn the on/off
button on (Fig 4/7). The switch is located on the front of
the cleaner, above the clean water tank.
The on/off button controls the vacuum motor. Press on
the unit recline pedal and pull the cleaner back into a
reclined position (Fig 4/8).
IMPORTANT: Never leave the cleaner unattended with
the power on.
NOTE: Vacuum carpets thoroughly with dry
vacuum cleaner before washing.
Whilst pressing solution spray trigger, push carpet washer
in a forwards motion. Release trigger and pull unit
backwards in same path to remove dirty water and
solution from the carpet. (Fig 4/9).
Repeat if necessary. When the dirty water reaches the
max fill line on the dirty water tank empty the tank.
Fig.4/4
Fig.4/5
Fig.4/6
Fig.4/8
Fig.4/7
Fig.4/9
!
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
VRS14W_User Guide_v1_V-024U User Guide 16/04/2012 16:36 Page 5
All manuals and user guides at all-guides.com
all-guides.com
