OPERATING THE MACHINE
9
Vax Commercial Careline: (UK) 0330 026 4275
Twist the handle height adjuster
forward and lift handle to the
preferred height.
Plug into mains and press the
handle release pedal. Pull the
handle backwards, and recline
to waist height.
For best cleaning results, use
slow straight parallel strokes while
squeezing the trigger. To pick up
dirty water, release the wash
button and move backwards.
Press the on/off pedal to switch
the carpet washer on.
Squeeze the wash button to
release water and solution mix.
Using the carpet washer
IMPORTANT:
Carpets should be dry vacuumed thoroughly before washing.
Check the carpet is colour fast
Before cleaning carpet/upholstery, test for colour fastness. Dampen a white cloth with solution.
Test a small area somewhere discreet. Gently rub the cloth over the area. Check each colour
for colour bleeding. If the cloth remains clean, it should be safe to clean the carpet/upholstery.
Helpful hints for cleaning carpet
1. Do not saturate carpet with water and cleaning solution when using the carpet washer.
2. For heavily soiled areas, additional applications may be necessary.
3. Allow plenty of time to dry carpet thoroughly.
4. Wipe cleaning solution from woodwork and wood to prevent any damage.
5. Try not to walk on carpet until it is completely dry.
6. After carpet is thoroughly dry, vacuum once more.
7. Ensure the power cable is hooked on the machine handle within the marked line area when in use.
!
!
!
!
1
2
1
2
2
1
NOTE:
If the machine
is in use and the power
supply to the machine
is cut, the machine will
automatically switch off.
When power supply is
re-connected the machine
will need to be turned on.
!
!
!
!
