FILTERS
The appliance is supplied with the following filters:
•
Solids filter (R):
this filter performs an initial filtration of
deposits and material of considerable size. The curved pieces
located at the ends can be removed for easy cleaning. Check and
wash with running water. Reinstall the curves by applying pressure
to fastened them to the special rib and housing
•
Sponge filter (Q):
The Sponge filter (Q) is to be used for
vacuuming dust, vapour and liquids with the water filter for more
thorough cleaning. Wash with running water from the inside out and
let it dry before putting back the filter assembly
(picture 34)
(picture 32)
picture 32
•
Microfibre filter (P):
This filter has a high filtering capacity and
allows you to vacuum up dust effectively. It is convenient function for
quick job as the dust remaining in the machine tank (M) is not in
contact with the water and therefore does not need to be rinsed out
immediately after use. To remove it, wash from the inside out under
running water then leave it to dry before reassembling the filter group
(picture 33)
IMPORTANT: The microfibre filter (P) should not be used during the
vacuuming with water filter.
•
Air filter (X):
this filter has a high filtering capacity and can filter
fine dust, thereby ensuring clean air coming out of the appliance.
Check it periodically by lifting the hooker lever
(picture 35)
•
Carbon filter (Y):
this filter has a high filtering capacity for
carbon dust which blocks the motor. Check it monthly by removing
the containment screen and, if necessary, replace it when dirty
CAUTION! Handle with care - Do not inhale - Keep out of reach of children
•
Water filter
employs the natural purifying strength of tap water to
catch the dirt, avoiding irritating contact with dust and harmful
dispersion of dust into the environment
EN
11
12
Summary of Contents for VCST-01
Page 1: ......
