4.
The vacuum cleaner must be in its upright
position to raise brushbar. Remove the hose from
the tool caddy. Choose any of the accessories or
use the hose alone. Simply push the attachment
firmly onto the end of the tube or hose handle. To
remove the tool, twist and pull apart gently (Fig 4/2).
5.
If additional length is needed, use the extension
tube and crevice tool. Pull crevice tool out of
extension tube and fit on to the end of the
extension tube. Use extension tube and crevice
tool together or separately (Fig 4/3).
6.
Use the carry handle on the dust container to move
the vacuum cleaner from room to room (Fig 4/3).
NOTE: Ensure dust container is secured in
place before lifting the vacuum cleaner.
5. Dust Container & Filters:
Removal & Replacement
WARNING: TO REDUCE THE RISK OF INJURY
FROM MOVING PARTS - UNPLUG BEFORE
SERVICING.
NOTE: Unplug vacuum cleaner before changing
filter.
NOTE: Rinse foam filter once every month. If
vacuum is used frequently, the filter may require
more frequent cleaning.
NOTE: For best performance, replace pleated
filter yearly.
1.
Press dust container release button on front of
vacuum cleaner to remove the dust container. Hold
dust container over dustbin and press the quick
release button to empty. Snap dust container
bottom back into place after emptying (Fig 5/1).
2.
Twist and lift to remove dust container (Fig 5/1).
Tap the lid on the inside of a dustbin to remove
excess dust from the filter.
IMPORTANT: Do not rinse the filter with water.
Remove the foam filter from the dust container.
Hold filter under running water to wash. Ring
excess water and allow to dry for at least 24
hours before replacing and using the vacuum
cleaner (Fig 5/2).
3. To replace foam filter return filter to dust container
by placing on top of screen inside dust container.
IMPORTANT: DO NOT RETURN FILTER TO THE
DUST CONTAINER BEFORE IT HAS COMPLETELY
DRIED.
Hold the dust container lid and grasp the filter tab.
Pull away from lid.
4. Return the filter to the dust container lid. Push
filter into place until it snaps to prevent leakage.
Align tabs on lid with the openings on the dust
container and twist to close and secure lid. Return
dust container to vacuum cleaner. Align slot on
bottom of dust container with tab on vacuum
cleaner. Push to snap into place (Fig 5/3).
How to Operate/Dust Container & Filter: Removal & Replacement
Fig.4/2
Fig.5/1
Fig.5/2
Fig.5/3
Fig.4/3
6
V-040_Ultrixx.qxd 11/4/06 13:22 Page 7
