9
Vax Careline
0870 606 1248
belt or brush bar / lightbulb removal and replacement
2. Remove dirt container (Pg. 6) and check dirt container
inlet located on cleaner.
Debris removal/Turbo Tool
To check for blockages in the TurboTool, simply lift the
inspection flap for access to the turbine. (see fig 8/3)
Replace all Two (2) screws to secure nozzle guard
(Fig.6/8).
7. Lightbulb: removal and
replacement
Please contact Vax on 0870 606 1248 for further
advice.
IMPORTANT: Do not attempt to remove or replace the
lightbulb yourself.
8. General maintenance
WARNING: To reduce risk of injury from moving
parts - unplug before servicing.
Debris removal/nozzle guard
• Check to see if dirt container is full; empty if needed.
• Plug cleaner in and check to see if there is any suction
at end of hose.
1. Unwrap hose from caddy. Press and remove tabs at
either end to remove. Clean out hose with broom handle.
Remove the two (2) screws on the base of the cleaner
and lift up base hood to check nozzle for blockages
(Fig.8/1).
Fig.6/8
Fig.8/1
!
Fig.8/2
Vax VZL 101 User Guide.qxd 4/10/07 09:03 Page 9
