7
dirt container & filter / maintenance
WARNING:
Always empty the dirt container and
clean the HEPA filter before each use and during
prolonged usage. Never over fill the dirt container, remove
dirt and clean the HEPA filter each time the dirt container
is emptied during prolonged usage or risk motor damage.
Cleaning the Pre-Motor Filter
Underneath the dirt container is a pre-motor filter. If
found to be defective, please replace (Fig.6/4).
Cleaning the Dirt Container
WARNING:
To reduce the risk of electric shock, the
power cord must be disconnected before removing
the dirt container, HEPA filter, changing the filters or
performing maintenance/troubleshooting checks.
• The dirt container can be washed in lukewarm water
(max 40ºC).
• Do not use strong detergents.
• Ensure that the dirt container is fully dry before putting
back on the vacuum cleaner. Do not wash in dishwasher.
7. Maintenance
Cleaning and Changing the Belt
TOOLS REQUIRED: Crosshead screwdriver.
WARNING:
To reduce the risk of electric shock, the
power cord must be disconnected before removing
the dirt container, HEPA filter, changing the filters or
performing maintenance/troubleshooting checks.
Occasionally, the floor head drive belt will require
changing, the frequency will depend upon the amount of
vacuum use.
Turn vacuum off and unplug from power supply. Press
handle release button and lay vacuum cleaner on a flat,
level surface.
Using a crosshead screwdriver, remove the five (5) screws
on the underside of the cleaner (Fig.7/1).
Pull down the smaller wheel flap on the underside and
remove the remaining screw inside the black tube
(Fig.7/2).
Fig.6/4
Fig.6/3
!
!
Tap!
!
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
Fig.7/1
Fig.7/2
U89 U90 & U91-P2 Power 2 Series User Guide V2.0:U90-P2 User Guide 13/08/2010 11:44 Page 7
