Using your machine
To produce steam squeeze
the trigger. To prevent
over wetting the carpet,
avoid holding the
trigger continuously.
Move the steam mop slowly
backwards and forwards
across the carpet paying
particular attention to high
traffic areas.
To release the carpet glider,
place foot on clip and push
down. Lift steam mop to
unhook and remove.
Refreshing carpets
To recline the steam mop
place foot on floorhead and
pull handle backwards.
Place foot on outer floorhead
and gently pull away steam
mop to release the compact
scrub brush.
Move steam mop back and
forwards across the floor,
getting into corners and
awkward places.
Using compact scrub brush
IMPORTANT:
When using on carpets, always make sure the microfibre cleaning pad is used and covers the floorhead entirely
before using the carpet glider. Only use the carpet glider when refreshing carpets and turn the detergent dial to OFF.
Turn the detergent dial to OFF
when refreshing carpets.
Place the microfibre pad on
the floor white side facing up.
Place steam mop onto pad
making sure the entire pad
covers the floorhead.
With microfibre pad attached,
hook the steam mop into the
front of the carpet glider and
push to clip into place. Carpet
glider should only be used
when refreshing carpets.
Push On/Off button
to switch on.
IMPORTANT:
Always switch off the steam mop before attaching or removing the floorhead.
