4
assembly
3. Assembly
Attach upper handle
Stand the base in the upright position. Assemble the mid
section onto the base, taking care not to trap internal
mains wire. (Fig.3/1).
Insert the two nuts into the recesses located on the left
and right sides of the base. While holding the nuts in place,
insert the two medium length screws through the front of
the mid section and tighten. (Fig.3/2).
Hold the nut in place, insert the long screw through the
front of the upper handle and tighten (Fig 3/3).
Fig.3/1
Fig.3/2
Fig.3/3
vax.co.uk
!
1
2
V-025 Series User Guide v1.0_V-025 30/09/2011 12:46 Page 4
