---
Vax Service line
AU: 1300 361 505 / NZ: 0800 800 900
6
Operation
Fill clean water tank
with solution mix.
Pour required dose of
pre-treatment solution
(approx. 40ml per 1L
of water).
Mix solution with warm
water. (max 40˚ C)
Remove clean water
tank.
Unwrap power cord and plug unit in.
Operating your pre-treatment wand
NOTE:
Pre-treating your carpet before washing will help to remove stubborn stains.
NOTE:
Do not over saturate your carpet.
NOTE:
Leave pre-treatment solution to work for 10-15 minutes then wash carpets as
described on page 7 of Operation.
IMPORTANT: Before setting the machine up to wash, ensure the clean water tank is
rinsed thoroughly of pre-treatment solution.
Spray evenly onto
desired areas.
!
Tighten cap before
returning tank to unit.
!
40° C
max
W90-RU & W89-RU Series User Guide v1.3.qxd:User guide 1/2/11 12:41 Page 6
Press ‘on’ pedal.
Remove pre-treatment
wand from holder and
unwrap solution tube.
Align inserts and push in.
Turn clockwise to secure.
To insert wand cable
into socket, align inserts
and push in. Turn
clockwise to secure.
