Taking care of your machine
Re-fitting the pre-motor filter and separator
Cleaning the post-motor filter
24hr
Remove any dirt/debris.
Rinse under water
(max 40°C).
Line up tabs on separator
with tabs in dirt container
lid. Turn clockwise until
separator clicks into place.
Lift to remove
post-motor filter.
Slide the pre-motor filter
into the central separator.
Leave to dry for 24
hours or until fully dry
before placing back in
the vacuum cleaner.
Line up the dirt container
lid with the dirt container.
Turn the dirt container lid
clockwise to lock.
The separator should
sit on seal in bottom of
dirt container when
correctly fitted.
Don’t use your vacuum
cleaner without all of the
filters in place.
IMPORTANT