Taking care of your machine
IMPORTANT:
The motor is equipped with a thermal cut-out. If for any reason the machine should overheat,
the thermostat will automatically turn the machine off. Switch off and unplug the vacuum cleaner. Check the
machine for blockages and clean the filters. Wash the filters with warm water (40°C max) and leave for 24
hours or until fully dry before replacing into the machine. Filters require cleaning at least every 3-6 months
(depending on the level of use). Don’t use your vacuum cleaner without all of the filters in place.
Emptying the dirt container
Press the dirt container release
button, pull and remove
dirt container.
Hold the dirt container over a bin.
Pull the dirt release clip, allowing
dirt/debris to fall out.
TIP
Don’t over fill the dirt container
to avoid blocking the air flow
through the vacuum cleaner
and replace filters every
6-9 months.