Taking care of your machine
To access water fi lter unscrew
water inlet connector and remove.
To remove water fi lter, pinch the
inner water fi lter tab with pliers
and gently pull.
Water fi lter can be rinsed under
running water periodically.
To remove the extension tube from
the trigger handle, fi rmly push and
twist the extension tube anti-
clockwise to unlock. Pull to remove.
Always store tools/cable/solution
tank into allocated slots.
To remove the lance from trigger
handle fi rmly push and twist
the lance anti-clockwise, when
unlocked pull to remove.
To remove the nozzles press the
nozzle release button and pull.
Insert the nozzle cleaning tool into
the end of nozzles to remove any
dirt or debris.
IMPORTANT:
Always rinse fresh water through your pressure washer and accessories for 1 minute after using
solution to prevent blockages.
Maintenance
Storage
IMPORTANT:
If using the pressure washer with water from a water butt, the water fi lter will require more
frequent cleaning.
IMPORTANT:
Before storing your machine always make sure no water remains in the pressure washer, hose/
accessories. Once machine is switched off and before removing the nozzles, lance or trigger handle always squeeze
the trigger until no more water comes out, to prevent frost damage. Keep in a dry place above zero degrees and out
of the reach of children.
Removing a blockage in the lance and nozzles