Removing blockages from the TurboTool
Removing debris from the brushbar
Removing a blockage from the hose
Using a pair of scissors
remove any threads or
hair caught around the
brush bar.
Press the release clip
on the stretch hose, pull
and remove hose from
the handle.
Slide the locking ring
to remove.
Line up the tabs on front
of housing and re-fi t.
Slide locking ring into
groove to secure.
Insert a broom handle or
similar blunt instrument into
the hose to remove blockage.
Lift and separate the
housing. Using a pair
of scissors remove any
threads or hair caught
around the brushbar.
Let’s talk technical
IMPORTANT:
Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks.
TIP
To test for a blockage
in hose, drop a small
ball of paper through
the hose. The paper
will drop through
if the hose is clear.
Summary of Contents for Power U84-M1-Be
Page 18: ...Notes...
Page 19: ...Notes...
