Washing hard floors
CAUTION:
To prevent damage to wood floors and other hard floors, follow the flooring manufacturer's
cleaning recommendations. Inspect the floor surface for a worn finish, bare wood or separated joints.
It is not recommended to use the carpet washer on floors if any of these conditions exist. Test on an
inconspicuous area first
IMPORTANT:
Hard floors should be dry vacuumed thoroughly before washing.
Before attaching the hard floor squeegee onto the carpet washer, either remove the tanks or make sure the tanks are
empty before lying the carpet washer on its back.
Using your machine
Pour the required amount
of solution into the tank.
Fill the clean water tank
with warm water
(max 40°C).
TIP
For best results, clean hard
floors in Quick Clean Mode
Lie the carpet washer on
its back and line up the
squeegee with the nozzle.
Hold the front of the squeegee onto the
edge of the nozzle and push the squeegee
under the nozzle until it clicks into place.