manualshive.com logo in svg

Vax MachAir UCA1GEV1, Quick Start Manual, Page: 5 / 16

Share
Download
Vax MachAir UCA1GEV1 Quick Start Manual Download Page 5

Contents 

Let’s talk safety

Getting to know your machine

Getting started

Using your machine

Taking care of your machine

Accessories

What to do if it goes wrong

Getting in touch

Initial setup for normal operation

1.

  Use the base accessories.

– Shortest hose

– Extension tube set to shortest practicable length.

2.

 Clean filters installed.

3.

 Dust receptacle empty.

4.

 All air vents must be closed.

5.

 Floor heads/tools set to Carpet Mode for carpet cleaning.

6.

 Mechanical Agitation turned ON for carpet cleaning.

7.

  Floor heads/tools set to Hard Floor Mode for hard floor cleaning.

8.

 Mechanical Agitation turned OFF for hard floor cleaning.

Some parts may vary according to model. 

Please check inside the box for more details.

Included with 

your machine

Mach Air

2-in-1 Tool  

(Crevice Tool, 

Dusting Brush)

Mach Air Revive

3-in-1 Tool  

(Crevice Tool, Dusting 

and Upholstery Tool)

2-in-1 Tool  

(Crevice Tool, 

Dusting Brush)

Mach Air Energise

Fur ‘n’ Fluff Tool

Summary of Contents for MachAir UCA1GEV1

















Reviews:

No comments