Vax MachAir UCA1GEV1 Quick Start Manual Download Page 3

• This appliance can be used by children aged from 8 years and above and 

persons with reduced physical, sensory or mental capabilities or lack of 

experience and knowledge if they have been given supervision or instruction 

concerning use of the appliance in a safe way and understand the hazards 

involved. Children shall not play with the appliance. Cleaning and user 

maintenance shall not be made by children without supervision.

• Only Vax recommended tools should be used with this vacuum cleaner.

• Don’t vacuum up any flammable or combustible materials (lighter fluid, 

petrol, kerosene etc.) or use the vacuum cleaner in an area with explosive 

vapours or liquid.

• Don’t vacuum up hot coals, cigarette butts, matches or smoking hot burning 

items or use in an area where there may be harmful fluids (chlorine, bleach, 

and ammonia drain cleaner).

• Don’t attempt to remove blockages with sharp objects as this may cause 

damage to your vacuum cleaner.

• Don’t use the vacuum cleaner with incorrect voltage as this may result in 

damage or injury to the user. The correct voltage is listed on the ratings label.

• Don’t wash the post-motor filter.

 

• Always switch off the vacuum cleaner before disconnecting 

or connecting the hose and accessories.

• Keep all openings clear and free from debris as this may affect  

the airflow/suction.

• Always replace the fuse in the plug with a British 13amp fuse.
• Always protect the power cable from heated surfaces and open flames.
• Use only CE approved 13amp extension cords, non-approved extension cords 

may overheat. Care should be taken to arrange the extension cord as it could 

be a trip hazard.

• Store the vacuum cleaner in a cool, dry area. If filters have been cleaned  

as per user the guide instructions ensure they are thoroughly dry before  

storing away.

Summary of Contents for MachAir UCA1GEV1

















Reviews: