5
Vax Careline
0870 606 1248
assembly
Clean water tank
NOTE: Make sure the grey wedge block is resting in
place (fig.3/7).
Line up the grooves of the clean water tank with the
support posts inside the handle. Tilt the top of clean
water tank inward and push until it locks into place
(Fig.3/8).
To install the tool caddy, line up the tabs of the tool
caddy storage with round tabs on the back of the handle
(above quick cord clip) (Fig.3/9).
Slide the tool caddy downwards until it is secured in place
(Fig.3/10).
NOTE: The tool caddy can be removed for storage on
a wall
Connect upholstery attachment to end of hose by
pressing until it clicks into place (Fig3/11).
Push upholstery attachment into the left hose clip, wrap
the hose around the tool caddy starting on the back
groove of the storage caddy.
Secure into place by pushing the end of the hose into the
hose clip on the right. Press the solution/ hose clip onto
the hose to secure the solution tube in place (Fig 3/12).
Fig.3/7
Fig.3/8
Fig.3/9
Fig.3/10
Fig.3/11
Fig.3/12