11
Vax Careline
0870 606 1248
maintanance
NOTE: Make sure the entire belt stays on top of the
first large pulley by lightly placing a finder on top to
guide it.
Return the nozzle cover to the original position (Fig.5/5)
Secure by replacing the two (2) screws.
Remove the screw that holds the brushbar in place
(Fig.5/6).
Tilt cleaner off the carpet. Grasp the brush bar and pull
the right side of its chamber.
Tilt the brushbar down to the ground and remove the
silver cap. Slide the worn brushbar out of the cleaner
(Fig.5/7).
To install a new brushbar. Feed the brushbar through the
opening until the screw plate and screw hole are lined up
(as above) (Fig.5/8).
NOTE: The black cap behind the silver screw plate will
be through the hole.
Replace the silver cap to right side of the brushbar.
Lift the brushbar up and align with the brushbar chamber.
Push the screw plate towards the screw hole until the
flush and replace the screw (Fig.5/9).
Fig.5/8
Fig.5/9
Fig.5/7
Fig.5/5
Fig.5/6
Fig.5/4