5
Carefully remove the
brush assembly cover.
To install brushes rest the
machine on the floor. Align
the post on the spin brushes
with the square hole and press
firmly to lock into place.
To lower handle, press handle
release button
and fold handle to
storage position.
Twist tank cap
anti-clockwise and
lift to remove.
Pour cleaning solution
into tank. Top up tank
to fill line with warm
water (Max 40�C).
Lock tank cap into
place to prevent
leaking.
Raise handle to upright
position until it locks
into place.
To remove the clean
water tank, squeeze
the release button
and pull the tank
straight out.
Tilt tank into position
and push firmly until
clicks into place.
Using the tank cap
as a measuring cup,
pour the required
amount of solution
(approx. 60ml per
1 litre of water).
1
1
6
3
3
4
2
2
4
5
Getting started with your Floormate Deluxe: Assembly
Using your Floormate Deluxe: Filling the clean water tank
!
WARNING
!
Always switch the machine off and unplug before carrying out any maintenance.
!
IMPORTANT
!
Only use Vax carpet cleaning solution. Using other solutions may cause excess foaming.
Excessive foam will prevent the machine from working effectively. Using other solutions will
invalidate the guarantee.
BEFORE YOU BEGIN CLEANING:
Please remove any large objects or debris and it is
advisable to then vacuum your hard floor prior to using
your Flooremate Deluxe.