---
6
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
Clearing blockages
WARNING:
To reduce the risk of electric shock, the power cord must be disconnected from the mains
supply before performing maintenance/troubleshooting checks. Turn the vacuum cleaner off and unplug
from the electrical socket
!
!
!
!
Hose blockages
The flexible hose should be disconnected from the
vacuum cleaner. Carefully remove any blockages found
and reconnect the hose securely.
Accessory blockages
Remove accessory from the hose/handle tube.
Carefully remove the blockage and return to the cleaner.
Clearing debris from the TurboTool
(some models only)
NOTE:
Switch the cleaner off and disconnect the power plug from the electrical outlet before performing this
check.
remove
locking ring
Maintenance
(Keep your Vax as good as new)
replace
locking
ring
Turn the TurboTool over and
slide off the locking ring.
Detach lower housing and
remove blockage.
To re-assemble the TurboTool,
ensure that the tabs are engaged
and pivot the lower housing
closed. Slip the locking ring over
the neck of the TurboTool and into
the groove to finish.
VEC-104 & 105 Essentials UG V1.0.qxd:User guide 2/9/11 16:03 Page 6
