background image

8

Using the carpet washer and cleaning modes

CAUTION: 

Always unplug the carpet washer before performing any maintenance/troubleshooting checks. 

IMPORTANT: 

Your dirty water tank is fitted with a float. When the dirty water tank is full, or the floorhead is not in contact 

with the carpet, the float will shut off the suction on the carpet washer. You will be able to hear if this has happened as the 

motor noise on the machine will increase. Once the float is activated, empty the dirty water tank if full. If the dirty water tank 

is not full then turn off your machine at the power switch and wait for the float to settle.

NOTE: 

Carpets should be dry vacuumed thoroughly before washing. For best overall results use in deep clean mode.  

For heavily soiled areas it may be necessary to repeat the cleaning process. Make crisscrossing strokes to the original  

pattern and overlap each pass.

Quick Clean Mode: 

Best for a quick, surface clean because carpets dry in as little as 1 hour.

Deep Clean Mode:

 Best overall results for a thorough, deep clean.

Press the clean water/

solution tank release 

button, pull and lift to 

remove the tank.

Fill the clean water tank 

with warm water (max 

40°C). Replace the cap 

before refitting the tank.

Tilt the clean water/

solution tank and line up 

onto the carpet washer. 

Push the tank back until  

it clicks into place.

Twist the water tank cap 

anti-clockwise to remove.

Pour VAX carpet cleaning 

solution into the tank.  

Replace the cap.

Choose the cleaning mode 

by turning the dial on the 

base. 

Quick Clean Mode

: Best 

for a quick, surface clean 

with carpets drying in as 

little as 1 hour.

Deep Clean Mode

: Best 

overall results for a 

thorough, deep clean.

Turn the wash/rinse dial 

to ‘wash’. The SpinScrub 

brushes deep clean your 

carpets with water and 

detergent removing dirt 

and stains.

Twist the solution tank 

cap anti-clockwise to 

remove.

TIP

Always empty and rinse out the clean and 

dirty water tanks and leave to air dry before 

replacing. Do not leave solution stored in 

the tanks between uses.

Using your machine

Summary of Contents for CDCW-RPXR





















Reviews: