6
vax.co.uk
1
2
Looking after your machine - Filters
Cleaning the HEPA post-motor filter
Cleaning the pre-motor filter
Advanced cleaning - cyclone seperator
WARNING:
For best cleaning results filters require cleaning at least every three months.
Do not use your
vacuum cleaner without all of the filters in place.
WARNING:
Always switch off and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
NOTE:
Wipe to clean. Parts must be completely dry before using your machine.
WARNING:
Do not wash the post-motor filter.
tap
24hr
tap
1
IMPORTANT:
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will automatically turn the unit off.
Should this occur, unplug the vacuum cleaner from the electrical socket and turn off the switch. Remove and empty the dirt container. Check the hose
for blockages. Clean the filters. Allow the unit to cool for approximately one hour (if you have cleaned the filters you will need to wait twenty four hours
for the filters to dry before putting them back in the machine). To re-start the machine, plug it into an electrical socket and switch it back on.
40 C max
o
Follow the instructions to unlock the cover to remove the
post-motor filter. Dry clean the post-motor filter and put
back in place.
Insert the cover back with the symbols being horizontal.
Follow the instruction to lock the cover until it clicks back
in place
1
2
1
2
