Assembling your vacuum cleaner
Press both buttons at end of hose and
insert into hose entry point.
Insert hose grip into telescopic
extension tube.
Press button on telescopic extension
tube and adjust to required length.
Insert the other end of
the telescopic tube into
the floorhead.
Before you begin cleaning
IMPORTANT:
The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner
off and unplug. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the
vacuum cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters to
fully dry before putting back into the machine).
Clean the pre-motor filter every time the dirt container is emptied and replace the post-motor filter every 12 months.
If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
Getting to know your machine
Getting started
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Always switch off the vacuum
cleaner before connecting
or disconnecting the hose/
attachments, or removing and
emptying the dirt container.
CAUTION
On/off button
Floorhead
parking slot
Cord rewind button
Dirt container
release button
Carry handle
Dirt container
Separator and shroud
Post-motor
filter cover
Hose entry
point
Pre-motor
filter (hidden)
Technical Specification
Name
Impact
Voltage
Please refer to product rating label
Wattage
Please refer to product rating label
Cord length
5-5.5m
Weight
4.3kg
Accessories & Consumables
Filter (Type 118) Pre-Filter
1-1-134534-00
Filter (Type 106) Post-Filter
1-1-134390-00
TurboTool (Type 4)
1-1-134340-00
Tool Connector (Type 1)
1-1-133838-00
Crevice Tool (Type 10)
1-9-128020-00
Combination Floor Tool (Type 6)
1-1-134330-00
Dusting Brush (Type 5)
1-9-127512-00
Subject to technical change without notice.
*
To purchase consumables and accessories, please visit
vax.co.uk
C85-ID-BePe_ImpactSeries_UG_[VAX01441]_PRINT_29.08.14.indd 6-7
12/09/2014 10:24