Vax AirRevolve Pet VX29 User Manual Download Page 14

•   Check the ‘This pack contains’ panel on the box to make sure the part  

is included with your vacuum cleaner.

•   The plug may not be fully pushed into the electrical socket.
•   The On/Off button on the vacuum cleaner or the hose handle has  

not been turned on. Go to ‘Using your machine’.

•   The motor thermostat may have tripped. If this has happened, unplug 

the vacuum cleaner. Remove and empty the dirt container and check 

the hose for blockages. Clean the filter and allow the vacuum cleaner 

to cool for approximately 1 hour (if you have washed the filter you will 

need to wait 24 hours for the filter to fully dry before refitting back into 

the vacuum cleaner).

Solution

Problem

CAUTION:

 To reduce the risk of personal injury, unplug the vacuum before performing  

maintenance/troubleshooting checks.

What to do if it goes wrong

Getting in touch

There is an  

accessory missing.

Why does my vacuum 

cleaner have no power?

Why won’t the vacuum 

cleaner pick up?

•   The dirt container may not be correctly fitted, remove the dirt container 

from the vacuum cleaner and check it’s assembled correctly, refit 

ensuring it’s locked into place. Go to ‘Taking care of your machine’.

 • The brushes on the powered head have not been turned on. Go to 

‘Using your machine’.

•   The filter may be clogged, clean the filter. Go to ‘Taking care of  

your machine’.

•   The dirt container, shroud or separator may be blocked, empty  

and clean the dirt container. Go to ‘Taking care of your machine’. 

•   There may be a blockage in the hose/telescopic extension tube/power 

head. Disconnect from the vacuum cleaner and carefully remove any 

blockages. Go to ‘Let’s talk technical’.

Why won’t the powered 

head brush turn?

Why is dust escaping  

from the vacuum?

•   Activate powered head brush by pressing powered head brush On/Off 

button. Go to ‘Using your machine’.

 • The powered head may be blocked. Go to ‘Removing blockages from 

the powered head’.

•   The filter may be clogged, clean the filter. Go to  

‘Taking care of your machine’.

Summary of Contents for AirRevolve Pet VX29





















Reviews: