Vax AirRevolve Pet VX29, User Manual, Page: 11 / 20

Taking care of your machine
Cleaning the pre-motor filter
Pull and slide the dirt container
release button. Pull to remove
dirt container from main body.
Leave for at least 24hrs or
until fully dry before re-fitting.
Pull the tab on the pre-motor
filter to remove the pre-motor
filter from the base of the
dirt container.
Make sure the tab on the
pre-motor filter is visible
when re-fitting the pre-motor
filter and sponge into the
dirt container.
24hr
Tap the pre-motor filter and
sponge over a bin to remove
any dirt/debris. Wash the filter
and sponge under running
water (40°C max).
Line up dirt container with
marked arrows and push
firmly into main body of
vacuum cleaner.
CAUTION: For best cleaning results filters require cleaning every 3-6 months or more frequently depending upon
level of use of vacuum cleaner. Discoloured or damaged filters need replacing. Unplug and switch off the vacuum
cleaner before performing maintenance or troubleshooting checks.
IMPORTANT:
Do not use your vacuum cleaner with a clogged filter and without the filter in place.
Removing hose, telescopic extension tube and accessories
Squeeze both buttons on either
side of hose connector.
Pull to remove hose.
Press release clip on hose
handle, pull to remove
telescopic tube.
Press release clip on telescopic
extension tube, pull to
remove accessory.