Vaventis fresh-r On-The-Wall, Installation Manual

Page: 30 / 36

30
15.2 Fresh air everywhere
®
: connect to your in-house ventilation system
The fresh-r everywhere
®
is designed to be part of your in-house ventilation system. By
mounting the extract ducts to the fresh-r everywhere
®
you can establish this connection.
The fresh-r everywhere
®
has an extract connection port on the top or the side according to the
specified configuration at the time of order. Only use this connection port to connect the fresh-r
everywhere
®
to your in-house extraction duct.
fig. 26 Example of an extract duct connected to the top of the fresh-r everywhere
®
To make this connection, three extract ducts can be used.
100
[ 3.937 ]
204
[ 8.032 ]
60
[ 2.362 ]
Rectangular duct Rectangular right angle duct Rectangular to round duct
It depends on the particular situation which extract ducts you need and how you make the
connection. Please refer to the next paragraphs for the dimensions of the extract ducs.
Please note that connection to the Fresh-r unit can only be achieved via a short length of
rectangular duct. Other connection pieces such as the low loss ben d can then be attached.