18
3. Turn the main electricity supply ON again at the distribution box.
4. Turn the fresh-r
®
ON and wait for approximately 1 minute while the unit boots up.
If you see three illuminated lights and notice fans running, the unit is properly
functioning.
If not:
Check the main electricity supply. If the product still does not work, turn the unit
OFF and contact your supplier.
7 Place the grilles assembly (fi nd the content in Bag B)
Do the following:
1.
Mount the grilles on the outer face of the outside-wall.
2. Place the covers.
NOTICE
The lip of the lower duct pipe should overlap with the edge of the grilles cover so
condensate water is guided from the outer wall.
fi g. 24 Place the grid assembly
Summary of Contents for fresh-r On-The-Wall
