VA-AH015
www.vava.com
Learn more about the EU Declaration of Conformity:
https://www.vava.com/downloads-VA-AH015-CE-Cert.html
E-mail: [email protected]
Tel: 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)
Address: 46724 Lakeview Blvd, Fremont, CA 94538
NORTH AMERICA
EUROPE
E-mail:
[email protected](UK)
[email protected](DE)
[email protected](FR)
[email protected](ES)
[email protected](IT)
EU Importer: ZBT International Trading GmbH, Halstenbeker Weg 98C,
25462 Rellingen, Deutschland
MANUFACTURER
Shenzhen NearbyExpress Technology Development Company Limited
Address: 333 Bulong Road, Jialianda Industrial Park, Building 1,
Bantian, Longgang District, Shenzhen, China, 518129
Note:
1. Remove the nozzle before you uplift the water tank, and put it back on when the water
tank is placed onto the base after the water has been added.
2. When you fail to open the tank cap, wipe the cap dry and rotate it with proper force.
Operation and Functions
Add water into the tank, connect to a power source, the unit is now in standby mode.
Note:
The buttons on the control panel are the same as those on the remote control.
（
1
）
Power On / Off
①
In standby mode, tap the Power Button once to enter Level 2 Misting by default and a
beep sound will be heard. The LED display will show the mist level, environmental RH, and
temperature.
②
Tap it again to power off the misting, and a beep sound will be heard. The LED display
shows the RH and temperature only.
（
2
）
Mist Adjustment
The mist level can be adjusted from 1 ~ 3 levels with a tap of the Mist Button. A beep sound
will be heard with each tap and the LED display will show the corresponding mist level.
（
3
）
Humidity Setting
①
Tap the Humidity Button once to activate continuous misting and the “CO” icon on the
Display flashes 3 times. Before the flashing ends, you can set the humidity level from 30%
to 95% through the Humidity Button by 5 with each tap. When set, the corresponding
humidity value will flash 3 times to confirm the setting and the humidity icon will keep
flashing.
Note:
The misting works normally if the set humidity on the unit is higher than the RH and
stops if the set humidity is lower than the RH.
②
After the humidity is set, tap and hold the Humidity Button for 1.5 seconds to exit the
setting, the LED display will flash “CO” 3 times. The humidity icon will disappear.
③
When the humidity is set, the Mist Button remains responsive.
（
4
）
Timer Setting
①
Tap the Timer Button once, the LED display will show “--H” and flash 3 times. Before the
flashing ends, set the timer from 1 to 12 hours by tapping the Timer Button. The
corresponding timer will show on the LED Display and flash 3 times to conf irm the setting.
②
When the timer is set, tap and hold the Timer Button for 1.5 seconds to exit the setting.
The LED display will show “—H”which will disappear after flashing 3 times.
③
A beep sound will be heard each time you tap the Timer Button.
（
5
）
Sleep Mode
①
Tap the Sleep Button once to enter sleep mode. All icons on the LED display (except the
sleep icon) will turn off. In sleep mode, the Mist Button, Humidity Button, and Timer Button
remain functional, but the beep sound is disabled.
②
In sleep mode, tap the Power Button to turn off the unit. Tap the Sleep Button to exit
sleep mode, the sleep mode icon will disappear.
（
6
）
Memory Function
With power connected, the unit will resume the humidity setting selected the last time it
has been turned off (the humidity setting icon will not be shown on the LED display). The
timer and sleep mode settings will be cleared.
（
7
）
Water Tank Light
The water tank light will turn on / off with the power.
（
8
）
Low Water or Water Tank Removal Protection
①
When water in the tank is depleted or the water tank is removed, the unit will stop
working and the water shortage icon will appear on the LED display.
②
The unit will resume working once water is added or the tank is placed back on the base.
