Charging
Charging the Earphones
When battery is low, the LED Indicator flashes red with a voice prompt to
remind you of a low battery. Put the earphones in their corresponding dock
to charge and the LED Indicator turns white and then shuts off when fully
charged.
Note: The LED Indicator flashes red once to indicate a correct connection
when being inserted into the dock.
Charging the Dock
The LED Indicator beside the charging port will turn red when the dock is
being charged and become blue after fully charged.
Charging
Charging the Earphones
When battery is low, the LED Indicator flashes red with a voice prompt to
remind you of a low battery. Put the earphones in their corresponding dock
to charge and the LED Indicator turns white and then shuts off when fully
charged.
Note: The LED Indicator flashes red once to indicate a correct connection
when being inserted into the dock.
Charging the Dock
The LED Indicator beside the charging port will turn red when the dock is
being charged and become blue after fully charged.
Function
Power On
Power Off
Play / Pause
Answer Phone Call
Hang Up Phone Call
Reject Phone Call
Master Device
(Right Earphone)
Slave Device
(Left Earphone)
Press and hold the Multifunction Button until the
LED Indicator flashes white
Press and hold the Multifunction Button until the
LED Indicator becomes red and then shuts off
Press the Multifunction Button once
When a call is incoming, press the
Multifunction Button once
N/A
N/A
N/A
N/A
During a call, press the Multifunction
Button once
When a call is incoming, press and hold
the Multifunction Button for 2 seconds
Activate Voice Control
When not playing music or on a
call, press the Multifunction Button
for 1 second
2. Remove the master device from the dock, press and hold the Multifunction
Button until the LED Indicator flashes red and white alternately to enter
pairing mode.
3. Turn on the Bluetooth function on your phone and search for “VAVA MOOV
21_R”, tap to connect.
4. Remove the slave device from the dock and put it close to the master unit
and press and hold the Multifunction Button until the LED Indicator flashes
white. They will sync and connect automatically.
Note:
The earphones can remember previously paired devices. If you have
previously paired with a device, simply turn on your device and the
earphones and they will connect automatically without going into
pairing mode.
Control Functions
03/04