Vauxhall Zafira, Owner'S Manual

Page: 178 / 219

Vehicle care 177
8. Open the rear power outlet and
insert plug of tyre repair kit.
To avoid discharging the battery,
we recommend running the
engine.
9. Switch on the compressor by
pressing the
<
button. The tyre is
filled with sealant.
10. The compressor pressure gauge
briefly indicates up to 6 bar whilst
the sealant bottle is emptying
(approx. 30 seconds). Then the
pressure starts to drop.
11. All of the sealant is pumped into
the tyre. Then the tyre is inflated.
12. The prescribed tyre pressure
should be obtained within 10
minutes. Tyre pressure
3
208.
When the correct pressure is
obtained, switch off the
compressor by pressing the
<
button again.
If the prescribed tyre pressure is
not obtained within 10 minutes,
remove the tyre repair kit. Move
the vehicle one tyre rotation.
Reattach the tyre repair kit and
continue the filling procedure for
10 minutes. If the prescribed tyre
pressure is still not obtained, the
tyre is too badly damaged. Seek
the assistance of a workshop.
Release excess tyre pressure
using the
]
button.
Do not run the compressor longer
than 10 minutes.
13. Disconnect plug from power
outlet, place in plug compartment
and remove tyre repair kit. Push
catch on bracket to remove
sealant bottle from bracket. Screw
tyre inflation hose to free
connection of sealant bottle. This
prevents sealant from escaping.
Stow tyre repair kit in load
compartment.
14. Remove any excess sealant
using a cloth.
15. Take the label indicating
maximum permitted speed from
the sealant bottle and affix in the
driver's field of view.
16. Continue driving immediately so
that sealant is evenly distributed
in the tyre. After driving approx.
6 miles (but no more than 10
minutes), stop and check tyre