192
Vehicle care
6. Screw the filler hose to the tyre
valve.
7. The switch on the compressor
must be set to O.
8. Connect the electrical connection
cable to the power outlet or
cigarette lighter socket.
To avoid discharging the vehicle
battery, we recommend running
the engine.
9. Set the rocker switch on the
compressor to I. The tyre is filled
with sealant.
10. The compressor pressure gauge
briefly indicates up to six bar
(600 kPa/87 psi). Then the
pressure starts to drop.
11. All of the sealant is pumped into
the tyre. Then the tyre is inflated.
12. The prescribed tyre pressure
should be obtained within
15 minutes.
Tyre pressure
When the correct pressure is
obtained, switch off the
compressor.
If the prescribed tyre pressure is
not obtained within 15 minutes,
remove the tyre repair kit. Move
the vehicle one tyre rotation
(approx. 2 m). Reattach the tyre
repair kit and continue the filling
procedure for 15 minutes. If the
prescribed tyre pressure is still not
obtained, the tyre is too badly
Summary of Contents for VIVARO
