Vehicle care
171
Note the expiry date of the kit. After
this date its sealing capability is no
longer guaranteed. Pay attention to
storage information on sealant
bottle.
Replace the used sealant bottle.
Dispose of the bottle as prescribed
by applicable laws.
The compressor and sealant can be
used from approx. -30 °C.
Checking and restoring pressure
1. Unscrew the valve cap from the
tyre.
2. Take out the pressure hose and
connect it to the tyre valve.
The cartridge will be connected to
the compressor and the tyre is
inflated, but no sealant will be
injected.
To deflate the tyre, press the
yellow button located on the
centre of the compressor switch.
3. Detach the tyre repair kit. Store
the tyre repair kit back in the
storage compartment of the door.
Replacing the sealant cartridge
1. Turn the cartridge to be replaced
anti-clockwise and lift it.
2. Insert the new cartridge and turn
it clockwise.
Wheel changing
Make the following preparations and
observe the following information:
● Park the vehicle on a level, firm
and non-skid surface. The front
wheels must be in the straight-
ahead position.
● If necessary, place a chock under
the wheel diagonally opposite the
wheel to be changed.
● Apply the parking brake and
engage first gear, reverse gear or
P.
● If the ground on which the vehicle
is standing is soft, a solid board
(max. 1 cm thick) should be
placed under the jack.
● Take heavy objects out of the
vehicle before jacking up.
● No people or animals may be in
the vehicle when it is jacked-up.
● Never crawl under a jacked-up
vehicle.
● Do not start the vehicle when it is
raised on the jack.
● Before screwing in the wheel
bolts, clean them.
