Vehicle care
161
3. Remove tail light assembly. Take
care that the cable duct remains in
position.
Detach wiring plug from bulb
holder.
4. Unscrew the screws and remove
bulb holder.
5. Push bulb into socket slightly,
rotate anti-clockwise, remove and
renew bulb.
Tail light/brake light (1)
Turn signal light (2)
Tail light (3)
Reverse light / Rear fog light, may
be only on one side (4)
6. Insert bulb holder into the tail light
assembly and screw into place.
Connect wiring plug. Install tail
light assembly in body and tighten
securing nuts. Close cover and
engage.
7. Switch on ignition, operate and
check all lights.
Ofrecido por www.electromanuales.com
Summary of Contents for Insignia 2009
