158
Vehicle care
2. Rotate bulb holder anti-clockwise
to disengage. Withdraw the bulb
holder from the reflector.
3. Detach bulb from bulb holder and
renew the bulb.
4. Insert the bulb holder, engaging
the two lugs into the reflector and
rotate clockwise to secure.
5. Rotate bulb carrier clockwise as
far as it will go.
6. Fit cap and rotate clockwise.
High beam
1. Rotate cap 2 anti-clockwise and
remove.
2. Detach wiring connector from
bulb.
3. Disengage spring clip from
retainer by pressing forward and
then swing downwards.
4. Withdraw bulb from reflector
housing.
5. When installing the new bulb,
insert lugs in the reflector
recesses and engage the spring
clip.
6. Install the wiring plug onto bulb.
7. Fit cap and rotate clockwise.
Ofrecido por www.electromanuales.com
Summary of Contents for Insignia 2009
