Vauxhall ASTRA, Owner'S Manual

Page: 244 / 291

242 Vehicle care
Uplevel display:
Select the Tyre load page under the
Options Menu in the Driver
Information Centre
3
113.
Select
● Light for comfort pressure up to
three people.
● Eco for Eco pressure up to
three people.
● Max for full loading.
Tyre pressure sensor matching
process
Each tyre pressure sensor has a
unique identification code. The
identification code must be matched
to a new wheel position after rotating
the wheels or exchanging the
complete wheel set and if one or more
tyre pressure sensors were replaced.
The tyre pressure sensor matching
process should also be performed
after replacing a spare wheel with a
road wheel containing the tyre
pressure sensor.
The malfunction light
w and the
warning message or code should go
off at the next ignition cycle. The
sensors are matched to the wheel
positions, using a relearn tool, in the
following order: left side front wheel,
right side front wheel, right side rear
wheel and left side rear wheel. The
turn signal light at the current active
position is illuminated until sensor is
matched.
Consult a workshop for service or
purchase a relearn tool. There are
two minutes to match the first wheel
position, and five minutes overall to
match all four wheel positions. If it
takes longer, the matching process
stops and must be restarted.
The tyre pressure sensor matching
process is:
1. Apply the parking brake.
2. Turn the ignition on.
3. On vehicles with automatic
transmission: set the selector
lever to P.
On vehicles with manual
transmission: select neutral.
4. Midlevel display:
Use MENU on the turn signal
lever to select the Vehicle
Information Menu
?
in the
Driver Information Centre.
Uplevel display:
Press
p
on the steering wheel to
open main menu page.
Select the Info page with
Q
or
P
.
Confirm with
9
.
5. Select the tyre pressure menu.
Midlevel display: