Driving and operating
141
Manual transmission
To engage reverse, with the vehicle
stationary and engine at idle depress
the clutch pedal, pull the ring under
the selector lever and engage the
gear.
If the gear does not engage, set the
selector lever to neutral, release the
clutch pedal and depress again. Then
repeat gear selection.
Do not slip the clutch unnecessarily.
When operating, depress the clutch
pedal completely. Do not use the
pedal as a foot rest.
When clutch slip is detected for a
specific time, the engine power will be
reduced. A warning is displayed in the
Driver Information Centre. Release
the clutch.
Caution
It is not advisable to drive with the
hand resting on the selector lever.
Gear shift indication
Drive systems
Drive modes
To select the respective drive mode,
use the shown toggle switch.
Internal combustion engine
The following drive modes are
selectable.
Normal mode
The settings in this mode are set by
default. Everytime the ignition is
switched on, this mode is selected.
Summary of Contents for Astra 2022
