168
Vehicle care
4. Detach bulb housing towards the
rear.
5. Unscrew the three screws using
a screwdriver. Press the locking
tabs on the outside of the bulb
holder inwards and remove the
bulb holder.
6. Remove and renew the bulb.
Reverse light (1)
Turn signal light (2)
Reverse light/brake light (3)
Reverse light (4)
Fog light, may be only on one side
(5)
7. Engage bulb holder in bulb
housing, ensuring that it properly
engages.
8. Ensure that the seals are applied
to the bulb holder and fixing
screws.
9. Insert the bulb housing in the
body, engaging the lug and the
ball pin in the recesses. Tighten
the fastening nuts using a wheel
bolt wrench. Attach the plug
connector. Close and engage the
flap.
Ofrecido por www.electromanuales.com
Summary of Contents for Astra 2010.5
