Vauxhall Antara 2014 Owner'S Manual Download Page 118

Page: 118 / 215

Climate control

117

■ Fan speed
■ Temperature on front passenger

side

AUTO = Automatic mode

= Automatic air recirculation

= Demisting and defrosting

Cooling A/C, Air recirculation

115.

Note

Do not cover the interior

temperature sensor (located beside

the fan switch) or the sunlight sensor

(located in front of the windscreen

defroster vents) as this could cause

the system to malfunction.

Heated rear window R

31,

Heated seats

38.

Automatic mode AUTO

Basic setting for maximum comfort:

■ Press AUTO button; cooling A/C is

switched on and the air distribution

and fan speed are regulated

automatically.

■ Open all air vents.
■ Set the preselected temperatures

for driver's side and front

passenger's side using the left and

right rotary knobs.

Note

All air vents are actuated

automatically in Automatic mode.

The air vents should therefore

always be open.

Temperature preselection

Recommended comfort setting is

22 °C. Intermediate settings are

possible.
Press SYNC button to automatically

adjust front passenger's side

temperature to match current driver's

side temperature. Activation is

indicated by the LED in the button.
If temperature settings are different

between driver's side and front

passenger's side, LED in SYNC

button extinguishes.

Manual settings

Summary of Contents for Antara 2014
























































































































































































































Search results

Summary of Contents for Antara 2014

Reviews:

Related manuals for Antara 2014

Brands by name

Popular brands

Vauxhall Antara 2014, Owner'S Manual

Search results

Summary of Contents for Antara 2014

Reviews:

Related manuals for Antara 2014

Brands by name

Popular brands