Driving and operating
129
Stop-start system
3
121.
Deactivation
Press button
B
; LED in the button
extinguishes and a message pops-up
in the Driver Information Centre.
Each time the engine is started, City
mode is deactivated.
Overload
If the steering in City mode is heavily
loaded, e.g. in long parking
manoeuvres or heavy city traffic, the
system is deactivated for overheat
protection. Steering operates in
normal mode until City mode
activates automatically.
Fault
In the event of a fault in the system,
c
illuminates and a message is
displayed in the Driver Information
Centre.
Vehicle messages
3
93.
System calibration
If control indicators
c
and
a
illuminate simultaneously, a
calibration of the power steering
system is necessary. This can occur
e.g. when turning the steering wheel
for one rotation with ignition switched
off. In this case switch on ignition and
turn steering wheel once from lock to
lock.
If control indicators
c
and
a
do not
extinguish after calibration, seek the
assistance of a workshop.
Summary of Contents for Adam 2014
