Vauxhall 2012 Agila Owner'S Manual Download Page 26

Page: 26 / 137

Keys, doors and windows

Heated

Operated by pressing the

button.

Heating works with the engine

running and is switched off

automatically after a short time.

Interior mirrors

Manual anti-dazzle

To reduce dazzle, adjust the lever on

the underside of the mirror housing.

Windows

Manual windows

The door windows can be opened or

closed with the window winders.

Power windows

Warning

Take care when operating the

power windows. Risk of injury,

particularly to children.
If there is a child on the front

passenger seat, switch on the

child safety system for the power

windows.
Keep a close watch on the

windows when closing them.

Ensure that nothing becomes

trapped in them as they move.

Power windows can be operated with

key in ignition switch position ON.

Summary of Contents for 2012 Agila










































































































































Search results

Summary of Contents for 2012 Agila

Reviews:

Related manuals for 2012 Agila

Brands by name

Popular brands

Vauxhall 2012 Agila, Owner'S Manual

Search results

Summary of Contents for 2012 Agila

Reviews:

Related manuals for 2012 Agila

Brands by name

Popular brands