Vauxhall 2012 Agila Owner'S Manual Download Page 101

Page: 101 / 137

100

Vehicle care

2. Close tailgate.
3. Remove light assembly from

tailgate.

4. Pinch both prongs on bulb holder

together simultaneously and

remove bulb holder from light

assembly.

5. Remove bulbs by pulling them

straight out.

6. Insert new bulbs by pushing them

in.

7. Replace bulb holder in light

assembly and install light

assembly in tailgate.

8. Open tailgate and replace bolts

removed earlier.

Number plate light

1. Remove bulb holder by twisting it

and pulling it away from the

vehicle.

2. Remove bulb by pulling straight

out.

3. Install new bulb by pushing in.
4. Replace bulb holder in original

position.

Interior lights

Front courtesy light

1. Using a suitable screwdriver

covered by a cloth, pry lens away

from headlining.

2. Remove bulb by pulling straight

out.

Summary of Contents for 2012 Agila










































































































































Search results

Summary of Contents for 2012 Agila

Reviews:

Related manuals for 2012 Agila

Brands by name

Popular brands

Vauxhall 2012 Agila, Owner'S Manual

Search results

Summary of Contents for 2012 Agila

Reviews:

Related manuals for 2012 Agila

Brands by name

Popular brands