177
Self-help, vehicle care
4. Screw the compressor air hose to the
connection on the sealant bottle.
5. Fit the sealant bottle in the retainer on
the compressor.
Set the compressor near the tyre in such
a way tha t the sealant b ottle is up rig ht.
6. Remove the v alve cap from the defective
tyre.
7. Sc rew the filler hose to the tyre v alve.
8. The switch on the compressor m ust be
set to
§
.
9. Plug the c om pressor connec tor into the
accessory socket or the ciga rette lig hter
socket. For ac cessory sockets
3
76.
10. Switch on ignition.
11. Set the rocker switch on the com pressor
to
I
. The tyre is filled with sea lant.
12. While the sealant bottle drains
(approx. 30 seconds) the pressure
indicator on the comp ressor briefly
points to 6 ba r. Pressure then sink s
again.
13. All of the sea la nt is pump ed into the
tyre. Afterwards, the tyre is filled with
air.
14. The presc rib ed tyre pressure should be
reac hed within 10 m inutes. Tyre
pressure
3
223. Switch off the
compressor when the correct pressure is
obtained.
Summary of Contents for 2010 Meriva
