background image

Technical information VERSO VA-IP2 – V1.0 

 

 

p.4/13 

 

 

 

Information and RECOMMENDATIONS 

 

o  Pursuant to European directive UTE C00-200, incorporating directives 89/336 EEC and 

92/31 EEC, VERSO complies with the following standards: 

•  NF EN 50081-1 governing electromagnetic radiation, and 
•  NF EN 50082-1 governing electromagnetic susceptibility. 

Cabling recommendations:

 the cables used to connect readers, the network and other 

peripherals must be installed in accordance with the instructions for Level 2 (protected 
environment) of standard NF EN 61000-4-4. 

This product must be installed by an approved company.

 Incorrect installation and use may 

result in electric shock or fire. Before installation, read the technical information and comply with 
the recommendations for assembling the product. 

For the 220V version, once the power is turned off, all the internal capacitors will discharge 
themselves to a safe level after 60 seconds under normal conditions. However, in the event 
of a power failure, the charge may be maintained for much longer and suitable precautions 
should be taken before handling the product. 

 

 

 

 

Summary of Contents for VA-IP2














Reviews: