EN
ENGLISH
6
facturer. A charger that is not suitable for a type of battery
may create a risk of fire.
3) Use power tools only with specifically designated bat-
teries. Use of any other battery may create a risk of injury
and fire.
4) When the battery is not in use, keep it away from other
metal objects such as paper, paper clips, coins, keys, nails,
screws or other small metal objects, which can be con-
nected from one terminal to another. Short-circuiting the
battery terminals may cause burns or fire.
5) Under abusive conditions, the battery may leak fluid;
avoid contact. If the liquid comes in contact with your eyes,
seek additional medical help. Liquid injected into the bat-
tery may cause irritation or dangerous burns and garves.
6 Service
Have a qualified technician repair your power tool using
only identical replacement parts. This will ensure that sa-
fety is maintained.
ADDITIONAL SAFETY RULES
1. Always use protective goggles, a cap and mask when
using the blower. Ordinary eye or sun glasses are NOT sa-
fety glasses.
2. Never point the nozzle at anyone in the vicinity when
using the blower.
3. Never block suction inlet and/or blower outlet.
-Do not block suction inlet or blower outlet to clean up in
dusty areas.
-Do not use the blower with a tapered nozzle smaller than
the original one, such as a new nozzle obtained by atta-
ching an extra diameter-reduced hose or smaller hose to
the nozzle top end.
-Do not Use the blower to inflate balls, rubber boat or the
similar.
Increased motor revolution may cause dangerous fan
breakage and result in serious personal injury. Heated mo-
tor and control circuit may cause a fire.
4.AVOID UNINTENTIONAL STARTING. Do not carry battery
fitted tool with finger on switch.
5.Some material contains chemicals which may be toxic.
Take caution to prevent dust inhalation and skin contact.
Follow material supplier safety data.
SAVE THESE INSTRUCTIONS
WARNING:
DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to safety rules for
the subject product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause serious
personal injury.
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1.1. Before using battery cartridge, read all instructions and
cautionary markings on (1) battery charger, (2) battery, and
(3) product using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter, stop
operating immediately. It may result in a risk of overhea-
ting, possible burns and even an explosion.
4. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It may
result in loss of your eyesight.
5. Do not short the battery cartridge: (1) Do not touch the
terminals with any conductive material. (2) Avoid storing
battery cartridge in a container with other metal objects
such as nails, coins, etc.
(3)Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow, overheating,
possible burns and even a breakdown.
6. Do not store the tool and battery cartridge in loca-
tions where the temperature may reach or exceed 50 º C
(122º F).
7. Do not incinerate the battery cartridge even if it is seve-
rely damaged or is completely worn out. The battery cartri-
dge can explode in a fire.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. Follow your local regulations relating to disposal of
battery.
SAVE THESE INSTRUCTIONS.
TIPS FOR MAINTAINING MAXIMUM
BATTERY LIFE
1. Charge the battery cartridge before completely dischar-
ged.
Always stop tool operation and charge the battery cartridge
when you notice less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room temperature at
10 º C - 40 º C (50 º F - 104 º F). Let a hot battery cartridge
cool down before
charging it.
4. Charge the battery cartridge once in every six months if
you do not use it for a long period of time.
Summary of Contents for 48266
Page 1: ...48266...
