
11
*It is recommended to use a φ 1 mm and 10 mm long pin.
11.
Video endoscope
cable connector
socket
The video endoscope cable can be inserted to this socket to
connect the video endoscope and the product.
12.
Ventilation holes
Cool hardware during use
.
13.
Bracket
It is used to support the product on a plane surface.
5.
Preparation and Operation
When using the product for the first time
, please refer to this User's Manual and install the product
according to the following steps.
Warning
Do not get the power cable wet;otherwise, electric shock may be caused.
Do not prepare, inspect or use the product with wet hands.
Do not bend, pull or twist the power cable; Otherwise, electric shock, equipment damage or fire may be
caused.
The product can be operated only under the conditions that meets the requirements given in "Operating
Environment", "Storage and Transportation Environment" of Chapter 9. Technical Specification;
Otherwise, malfunction, impaired safety and/or equipment damage may be caused.
Do not place any equipment on top of the product; otherwise, the product may be damaged.
Do not install the product near any strong electromagnetic radiation source (e.g. microwave therapy
equipment, shortwave therapy equipment,and MRI); Otherwise, the product may malfunction.
Before
each procedure, inspect the Digital Video Monitor as instructed below. Inspect other equipment to be
used with this Digital Video Monitor as instructed in their respective instruction manuals. If any irregularity be
observed, do not use the Digital Video Monitor.
Caution
Do not use any sharp object to operate the screen of the product; otherwise, the screen may be
damaged.
Never apply excessive force to the connector; otherwise, the product may be damaged.
5.1.
Preparation and Inspection
Warning
In order to avoid the risk of power supply, the power supply with medical certification specified in the
manual should be selected. When the power supply needs to be connected,only the type and
manufacturer as stated in the packing list is allowable. Otherwise, operator or patient injury may occur.