EN
The VehiCle baTTery
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
inStallinG the Vehicle Battery
1
Ensure the ESC is powered OFF.
2
Remove the body from the chassis.
3
Remove the body clip from the battery
strap, then lift the back of the battery strap.
The battery strap will rotate toward the
front of the car.
4
Install the fully charged battery in the
battery cavity.
5
Connect the battery to the ESC.
6
Lower the battery strap and secure
it using the body clip.
7
Power ON the transmitter, then the vehicle.
8
Replace the body on the chassis.
The TransmiTTer
/ / / / / / / / / / / / / / /
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
inStallinG the tranSMitter BatterieS
1
Push in the battery cover a small amount
to release the retaining tab, then remove
the cover.
2
Install 4 AA batteries, taking care to align
the battery polarity to the diagram in the
transmitter’s battery case.
3
Carefully reinstall the battery cover
by aligning the tabs with the slots
on the transmitter.
CauTion:
NEVER remove the
transmitter batteries while the vehicle
is powered ON, as loss of control,
property damage or injury may result.
CauTion:
If using rechargeable
batteries, charge only rechargeable
batteries. Charging non-rechargeable
batteries may cause the batteries to
burst, resulting in injury to persons
and/or damage to property.
