Vatech PaX-Primo User Manual Download Page 33

Page: 33 / 98

From the menu bar, select

Database>New>Add.

Then the following dialog box will pop

up.

2. Enter the required patient information.

Chart number, first name

and

Last name

are

required fields to be filled in.

3. Other fields, although optional, are recommended to be filled in.

4. Once all the necessary parameters are entered, Click

Add

to save configurations.

4.3

Turing on the PaX-Primo

Before switching on the equipment, check that installation of the unit is complete.

To switch on the unit, follow these steps.

1. Press

the

ON/OFF

switch on the column.

For the detailed operation on how to use this software, please refer to the

EasyDent user manual.

To increase the operating life of the X-Ray tube, if the equipment has not

been used for long time, you must pay special care before use.

Summary of Contents for PaX-Primo



































































































Search results

Summary of Contents for PaX-Primo

Reviews:

Related manuals for PaX-Primo

Brands by name

Popular brands

Vatech PaX-Primo, User Manual

Search results

Summary of Contents for PaX-Primo

Reviews:

Related manuals for PaX-Primo

Brands by name

Popular brands