Vatech EzRay Chair, User Manual

Page: 47 / 86

6. User Maintenance
EzRay Chair (VEX-S300C) User Manual 39
EN
G
LISH
6. User Maintenance
For your equipment will operate as efficiently as possible, it is recommended that you
perform the following procedures for your routine maintenance activities.
Maintenance Task Checklist
Always turn off the equipment before performing any
maintenance.
Tasks Period
Sterilize all components that meet the patient and operator by
using an alcohol-based solution.
Daily
Wipe the outer covers of the equipment with a dry cloth at the
end of each day’s operation.
Daily
Ensure that the main power button has been turned off after
using the equipment.
Daily
Ensure the audible signal is audible and the X-ray exposure
light is visible when you perform an exposure.
Daily
Ensure that the wall framework is securely attached to the wall. Daily
Ensure that the yellow (exposure) indicator light turns on when
the exposure button is pressed.
Daily
Ensure that the power cable does not have cuts or abrasions. Monthly
Ensure that all cable connectors are not mechanically
defective.
Monthly
Ensure that the control panel has no defects. Monthly
Ensure that the power cable does not have cuts or abrasions. Monthly
Ensure that all visible labels are intact and legible. Monthly
DO NOT use detergents or solvents to clean the outer covers
of the equipment.
If any defects are found, do not operate the equipment since
it must be handled by a qualified person. Contact your
Service Representative.