ce
rti
fied
QM-Sys
tem
g
ep
rüfte
s Q M-S
ys
te
m
ISO 9001
EN 29001
Installation, Operating, and Maintenance Instructions
Series 64.1
VAT Vakuumventile AG, CH-9469 Haag, Schweiz
Tel ++41 81 771 61 61 Fax ++41 81 771 48 30 Email [email protected] http://www.vatvalve.com
225590EE
2005-04-26
1/16
Adaptive Pressure Controller
PM-4 & 5 for Gate Valve Control System
This manual is valid for product with the
product identification number
FABR. NO. 641PM - . 6 . . - . . . .
configured with Software Version
64PM.3I.00
The product identification is specified on the rear panel of each PM controller:
Made in Switzerland in 20 . .
Patented
641P . - . 6 . . - . . . . - . . . .
Read these «Installation, Operating and Maintenance Instructions» (IOMI) and the enclosed
«General Safety Instructions» carefully before you start any other action.
Table of content
1 Intended Use of Product .......................................................................................................................... 2
1.1 Technical
Data................................................................................................................................. 2
2 Installation ............................................................................................................................................... 2
2.1
Content of VAT PM Controller Delivery ............................................................................................ 2
2.2 Hardware
Installation ....................................................................................................................... 2
2.3
PM Configuration (setup sequence) ................................................................................................. 4
3 Operation ................................................................................................................................................ 5
3.1
Local Mode (PM-4 with Service Box only) ........................................................................................ 5
3.2
Remote Mode (PM-5 if Interface installed only) ................................................................................ 5
3.3
Power Failure / Power Failure Option (PFO)..................................................................................... 5
4 Preventive
Maintenance .......................................................................................................................... 6
5 Spare Parts / Retrofit Options .................................................................................................................. 7
6 Trouble
Shooting ..................................................................................................................................... 7
7 Repairs.................................................................................................................................................... 8
8 Warranty ................................................................................................................................................. 8
9 Engineering
Information........................................................................................................................... 9
9.1 Wiring
of
Connectors ....................................................................................................................... 9
9.2 RS232C
Interface
Configuration..................................................................................................... 12
9.3 RS232C
Communication................................................................................................................ 12
9.4
User Information and Recommendations........................................................................................ 16
PM-5
PM-4
