1)
Place box marked Center Hub
Assembly in an open area of your
shop floor. Remove top of box.
Center Hub assembly can remain
in the box while installing legs and
optional service pan.
2)
Insert a leg through both rectangular
openings in the upper and lower
base plates of the base hub. Angled
mounting bracket on leg should now
be laying flat against the base plate.
Insert 5/16 x 3/4 lg. bolt through the
angled mounting bracket and into
base plate. Tighten bolt securely
with 1/2” wrench.
3)
Install three remaining legs like in step
2. Make sure all bolts are tight.
Carefully turn machine over onto legs.
Assembly
Tabletop models skip to page 8.
Mid-Pan
4)
Install Mid-Pan. Mid-Pan rotates into
place and is installed with (4) 5/16 x
1/2” bolts and Serrated Nuts.
Leg
(1of4)
Center Hub
Assembly
Base Hub
Base Plate
Pg.7
